-
Power Seat Regulate Base, PA66+33% GF
Challenges: Highly demanding +/-0.05 tolerance required on part; Flatness specification is 0.05mm and all dimensions need in spec. Kore Solutions:…
-
Sensor Connector, Insert Molding, PA66+30% GF
Challenges Customers faced: The connector part requires overmoulding of multiple metal inserts. The metal inserts are small and flimsy and…
-
3K Multi-shot Injection Molding
Challenges Customer Faced: Delamination of different components in the multi-shot part and 2nd shot light colored material melting the 1st…
-
2K Gear, POM + TPE
Challenges customer faced: TPE material only have 3 locating holes on the hard shot to provide mechanical bonding, part will…
-
Sensor Lever – Insert Moulding
Challenges customer faced: Tight-tolerances plastic insert moulded parts with low-tolerance metal stamped inserts. Our Solution: Achieved high dimensions accuracy (Tolerances…
-
Knob Shaft – Double-Colour/ 2K Plastic Part
Challenges customer faced: Customer approached us to handle an overmould automotive project that has 2 materials that are not bonding…
-
Photoelectric reaction support base, Precision Tooling, POM
Challenges Customers Faced: Tight-tolerance holes inner diameter and hole-to-hole distances of +0.02/-0.01. Thick wall stock prone to sink and affecting…
-
Liftgate Housing for trunk – Overmould
Challenges customer faced: Part flatness and Mould construction is complicated. Our Solution: Issues are resolved, we ensure the part is…
-
Assy. Lumbar – Insert and Precision Moulding
Challenges Our Customer faced: Customers required 4 metal inserts be cut precisely as they are placed close together. Our Solution:…
Recent Projects
Categories: